Gellan gum raw material potassium chloride KCl
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,FCA,CPT|
|Min. Order:||25 Metric Ton|
|Delivery Time:||10 Days|
|Packaging:||25kg PP+PE or Craft paper+PE bags|
|Place of Origin:||China|
Model No.: Food grade
Potassium Chloride USP Grade Specifications
Molecular formula: KCl
Molecular weight: 74.55
Assay- Potassium Chloride contains not less than 99.0 percent and not more than 100.5 percent of KCl, calculated on the dried basis.
Packaging and storage- Preserve in well-closed containers.
Labeling- Where intended for use in hem dialysis, it is so labeled.
Identification- A solution (1 in 20) responds to the tests for Potassium and for Chloride.
Acidity or alkalinity- To a solution of 5.0 g in 50 mL of carbon dioxide–free water add 3 drops of phenolphthalein TS: no pink color is produced. Then add 0.30 mL of 0.020 N sodium hydroxide: a pink color is produced.
Loss on drying - Dry it at 105 for 2 hours: it loses not more than 1.0% of its weight.
Iodide or bromide-
Standard stock solution- Transfer an accurately weighed quantity, about 41 mg, of potassium iodide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix.
Standard solution- Dilute 1.0 mL of Standard stock solution with water to 25 mL, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with [Add 1 mL each of chloroform".
Test solution- Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 2 drops of a chloramine T solution (0.1 in 100), and shake gently. The violet color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.005%.
Standard solution- Transfer an accurately weighed quantity, about 32 mg, of sodium bromide to a 25-mL volumetric flask. Dissolve in and dilute with water to volume, and mix. Dilute 2.0 mL of this solution with water to 8 mL, and proceed as directed for Test solution beginning with [Add 1 mL each of chloroform".
Test solution- Dissolve 2 g in 8 mL of water. Add 1 mL each of chloroform and diluted hydrochloric acid, then add 5 drops of a chloramine T solution (1 in 100), and shake gently. The brown color of the chloroform layer is not darker than that of a concomitantly prepared Standard solution: the limit is 0.1%.
Aluminum- where it is labeled as intended for use in hem dialysis- Proceed as directed using 2.0 g of Potassium Chloride to prepare the Test Preparation: the limit is 1 µg per g.
Calcium and magnesium- To 20 mL of a solution (1 in 100) add 2 mL each of 6 N ammonium hydroxide, ammonium oxalate TS, and dibasic sodium phosphate TS: no turbidity is produced within 5 minutes.
Sodium- A solution (1 in 20), tested on a platinum wire, does not impart a pronounced yellow color to a non-luminous flame.
Heavy metals- Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Organic volatile impurities: meets the requirements.
Potassium Chloride BP Specifications
Potassium Chloride BP
99.0 per cent to 100.5 per cent of KCl (dried substance).
White or almost white, crystalline powder or colorless crystals.
Freely soluble in water, practically insoluble in anhydrous ethanol.
It gives the reactions of chlorides.
Solution S gives the reactions of potassium.
Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colorless.
Acidity or alkalinity: To 50 ml of solution S add 0.1 ml of bromothymol blue solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Bromides: Maximum 0.1 per cent.
Iodides: Moisten 5 g by the drop wise addition of a freshly prepared mixture of 0.15 ml of sodium nitrite solution, 2 ml of 0.5 M sulphuric acid, 25 ml of iodide-free starch solution and 25 ml of water. After 5 min, examine in daylight. The substance shows no blue color.
Sulphates: Maximum 300 ppm.
Aluminium: Maximum 1.0 ppm, if intended for use in the manufacture of hem dialysis solutions.
Barium: To 5 ml of solution S add 5 ml of distilled water and 1 ml of dilute sulphuric acid. After 15 min, any opalescence in the solution is not more intense than that in a mixture of 5 ml of solution S and 6 ml of distilled water.
Iron: Maximum 20 ppm.
Magnesium and alkaline-earth metals: Maximum 200 ppm, calculated as Ca.
Sodium: Maximum 0.10 per cent, if intended for use in the manufacture of parenteral preparations or hem dialysis solutions.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105 C for 3h.
Potassium Chloride FCC Food Grade US Food Chemical Codex
Formula wt 74.55
DESCRIPTION: Potassium Chloride occurs as colorless, elongated, prismatic, or cubical crystals, or as a white, granular powder. It is stable in air. Its solutions are neutral to litmus. It may contain up to 1.0% (total) of suitable food-grade ant-caking, free-flowing, or conditioning agents such as calcium stearate or silicon dioxide, either singly or in combination. One gram dissolves in 2.8 mL of water at 25°, and in about 2 mL of boiling water. Potassium Chloride containing anti-caking, free-flowing, or conditioning agents may produce cloudy solutions or dissolve incompletely. It is insoluble in alcohol.
Function: Nutrient; gelling agent; salt substitute; yeast food.
Identification: A 1:20 aqueous solution gives positive tests for Potassium and for Chloride.
Assay: Not less than 99.0% of KCl after drying; and not less than 98.0% of KCl after drying when a sample contains added substance.
Acidity or Alkalinity: A sample containing no added substance passes test.
Heavy Metals (as Pb): Not more than 5 mg/kg.
Iodide and/or Bromide: Passes test.
Loss on Drying: Not more than 1.0%.
Sodium: Passes test.
Potassium Chloride ACS Analytical Reagent Specifications
American Chemical Society Reagent Grade
Potassium Chloride KCl
Formula Wt 74.55
CAS Number 7447-40-7
Assay: ---------------------- 99.0-100.5% KCl
pH of a 5% solution --------- 5.4-8.6 at 25C
Insoluble matter ------------ 0.005%
Iodide (I) ------------------ 0.002%
Bromide (Br) ---------------- 0.01%
Chlorate and nitrate (as NO3) 0.003%
Nitrogen compounds (as N) --- 0.001%
Phosphate (PO4) ------------- 5 ppm
Sulfate (SO4) --------------- 0.001%
Barium (Ba) ----------------- Passes test
Heavy metals (as Pb) -------- 5 ppm
Iron (Fe) ------------------- 3 ppm
Calcium (Ca) ---------------- 0.002%
Magnesium (Mg) -------------- 0.001%
Sodium (Na) ----------------- 0.005%
Jiangsu Kolod Food Ingredients Co., Ltd.
Jiangsu Kolod Food Ingredients Co., Ltd. is a leading manufacturer of high-purity chemicals in China. We produce phosphates, sulfates, chlorides, citrates etc. mainly food and pharma grade. We have passed ISO 9001, ISO 14001, ISO 22000, KOSHER, HALAL, GMP, FDA certifications. There are 12 workshops in our factory, and we produce dozens of products. Our production capacity is 200,000MTs/year. With stable and superior quality, we have been authorized supplier of Coca-cola, Nestle, Mars Group, Brenntag for years.
- Company Name: Jiangsu Kolod Food Ingredients Co., Ltd.
- Product/Service: Chemical Raw Materials , Organic Chemicals , Inorganic Salt , Food Additive , Feed Additive , Chemical Fertilizer
- Contact Person: Mr. Tom
- Tel: 86-518-85110858
Premium Related Products